Welcome to use our products, please read the instructions carefully.
¢ñ.How to use
1£® Take out the inflatable toys. If the earth surface is enough flat, it may be placed directly on the ground; But if there is sharp gravel or other things on the ground, a necessary protection layer should be spread (for instance, color-bar cloth, waterproof cloth, etc .). then put the inflatable toys on it.
2£® The circuit distribution, installation and repair shall be done by professional electricians who have technical qualifications as per relevant regulation of the state in regard to safety use of electricity.
3£® Check if the blower power match with the inflatable toys and see if the voltage adapt to your country.
4£® Use the blower as per the instructions. Check if the blower vane is loose; turn the vane to see if there is any foreign matter. Connect the electric source to try the machine after through your examination and confirmation; when using 3-phase blower, you'd better use open-phase protection lest that the blower will be damaged due to loss of phase.
5£® When starting several blowers, you should start them one by one, starting the second one after the first one is running for 20-30 seconds.
6£® Tie up the blower mouth.
7£® When business ends, turn off the electric source first, and then untie the blower mouth. Move away the blower after the vane stops running, and then fold the toys after the air give out.
¢ò.Safety Measures
If the equipment is used outdoor, the equipment must be fixed firmly to increase the anti-wind capability.
¢ó. Example:
Take LI-007# Sun Castle (17*5*6m) for example
Children climb to the bridge from the upper slope, step forward along the bridge, and at last slide down from the lower slope. Only when the first child steps to the middle of the bridge could the next one come up to the bridge.
Warning: children are forbidden to play on the protective cushion under the bridge, and when passing the one-plank bridge, it is not allowed to converse, and it is strictly forbidden to jump down from the bridge.
Special Warning:
1. Hard and sharp things are forbidden to bring in by children.
2. Children are forbidden to chase and fight.
¢ô.Product Maintenance Methods
1. Keep the product clean and clean it regularly..
2. Keep it dry,Water proof, damp proof and mainly protect the suture. Blow and drying after rain to make it dry.
3. Adhesive conditions: A. Dry air, B. Above 20¡ãC.
4. Adhesive method: A. Clean the adhesive bar and the cloth to be stuck, B. keep adhesive evenly and thinly, C. stick it after the adhesive turns white by cooling, and press it strongly.
5. The suture that children usually rub and the newly sew thread must be stuck firmly. Make up timely when the sticking bars are off.
6. The thread the children could not step on should be adhesive if it is used for a long time or if the pinhole is too large.
7. Stick firmly and timely if it is used for years when parts of the cloth are off and sew before sticking when necessary.
8. Using and repairing of the blower, please see the usage and repair method with it.
¢õ.Special Treatment:
1. Lower the noise of the equipment, add soundproof cover to the blower or change the blower into low-noise fan.
2. If there is any problem that could not be solved in these instructions, please contact the manufacturer.
